Septic System & Wastewater System
~ Design & Installation ~

FAQs

• How often should I have my septic system inspected?

  It is recommended to have your septic system inspected and pumped at least once every three years. Regular pumping of the solids is essential to maintain the proper functioning of the septic tank. Our team of experts will thoroughly inspect your system and pump out any accumulated solids to ensure it's working correctly and to identify potential issues before they become more serious.

• What should I do if I have a septic emergency?

  If you have a septic emergency, don't hesitate to call Two Hills Septic Ltd. Our technicians are available 24/7 to resolve any septic issues.

• How much does it cost to have a septic system installed?

  The cost of septic system installation will vary depending on the type of system required as per soils, water table, water usage, the size of your property, and other factors. Our team of experts will work with you to assess your needs and provide a customized solution at a competitive price.

• How far down in the ground is a septic tank?

  When it comes to installing a septic tank, the depth at which it should be buried can vary depending on the location's soil conditions and local regulations. Typically, septic tanks are installed at a depth between 4 to 6 feet beneath the ground surface. However, in certain areas, a deeper installation may be necessary to comply with local regulations or to accommodate soil conditions. Therefore, it's crucial to seek guidance from a licensed septic system installer and local authorities to ensure that the septic tank is buried at the appropriate depth for the specific location.

• What are the factors to be considered in the design of a septic system?

  Several factors must be considered when designing a septic system to ensure its proper functioning and efficiency. The first factor to consider is the size of the property and the number of people using the system. The amount of wastewater generated by the property will determine the required size of the septic tank and the drain field. Soil type and soil permeability are also essential factors in the design of a septic system. The soil's ability to absorb and filter wastewater will determine the type of drain field and the size of the system. The topography of the property and the groundwater level are also important considerations in the design of a septic system. The system must be installed in a location that is not prone to flooding and is not too close to the water table. Finally, local regulations and codes must be adhered to when designing a septic system to ensure that it meets health and environmental standards. All of these factors must be carefully considered to design a septic system that is safe, efficient, and environmentally friendly.

• What is the best residential septic system?

  The best residential septic system is one that is designed to meet the specific needs of the property and its occupants. A conventional septic system is the most common type of residential septic system and is suitable for most properties. However, if the soil conditions are not favorable, an alternative system such as a sand mound or an aerobic treatment unit may be required. These alternative systems are more expensive than conventional systems but can be more effective in treating wastewater. In some cases, a holding tank may be the best option for properties that cannot accommodate a drain field. The holding tank requires frequent pumping, but it is an effective way to store wastewater until it can be properly disposed of. Ultimately, the best residential septic system depends on various factors, including property size, soil conditions, and water usage. It's essential to consult with a licensed septic system installer to determine the best system for a specific property and to ensure that it is installed correctly and safely.

• How should I care for my septic system once it's installed?

  Proper care and maintenance of a septic system are crucial to ensure its long-term performance and efficiency. After installation, it's important to avoid flushing anything other than human waste and toilet paper down the toilet. Do not flush non-biodegradable items, such as feminine hygiene products, paper towels, or wipes, as they can clog the system. It's also important to avoid pouring grease, oil, or chemicals down the drain, as they can harm the bacteria in the system that break down the waste. Regular pumping of the septic tank is necessary to remove the accumulated solids and prevent system failure. The frequency of pumping depends on the size of the tank and the number of people using the system. A licensed septic system professional can determine the appropriate pumping schedule for a specific system. It's also important to inspect the system regularly for any signs of leaks or damage and to address any issues promptly. By following these guidelines and seeking professional help when needed, homeowners can ensure that their septic system functions properly and efficiently for years to come.

• How do I know if my septic tank needs to be cleaned?

  Regular maintenance and cleaning of a septic tank are essential to keep the system functioning correctly. Over time, solids and sludge accumulate in the tank, reducing its capacity and potentially causing backups and system failure. There are several signs that indicate that a septic tank needs to be cleaned. Slow-draining sinks, toilets, and showers are common signs that the tank is full and needs to be pumped. Foul odors in the house or yard can also indicate that the septic tank is full and needs to be cleaned. If there is standing water or damp areas in the yard near the drain field, it may be a sign of a clogged or malfunctioning system. Finally, if it has been more than three to five years since the last pumping, it's time to schedule a cleaning. Regular maintenance and cleaning of the septic tank can prevent costly repairs and ensure that the system functions correctly for years to come.